EPEVER Upgraded 30A MPPT Solar Charge Controller Tracer A 3210AN with LCD Display & Remote Meter MT-50 - Compatible with Gel, Sealed, Flooded & Lithium Batteries (Negative Grounded) - Ideal for RV, Marine, Off-Grid Solar Systems & Home Energy Storage

Product Description

MPPT Solar Charge Controller 30A 12v/24v Auto +MT50 + Temp Sensor Cable with for Gel AGM Sealed Flooded LithiumSolar Battery, Negative Grounded Parameters: Rated charge current: 30A Max.PV input power: 390W for 12V battery system; 780W for24V system. Battery type: Lead-acid (Sealed, AGM, Gel, Flooded) and Lithium. Battery voltage range: 8V~32V Negative GroundTerminal: 6AWG(16mm2 )Recommended cable:8AWG(10mm2) Dimension: 228x164x55mm Net weight: 1.2kg MT50 Automatic identify the controller, and display the type, model and relevant parameter data. Data flowing on the same lead ,no need for external power. Temp sensor cable (RTS300R47K3.81A) Product Features: EPever 30A MPPT charge controller fits for 12V/24V Battery DC automatically identifying system. PV input power:390W/12V battery, 780W/24V battery. Max PV voltage of 100V. Common Negative ground design.Accurately recognizing and tracking of multiple power point, with HIGH tracking efficiency more than 99.5%, PEAK conversion efficiency of 98%.30A MPPT Charge controller is compatible with Lead-acid batteries, GEL/AGM and Lithium batteries. (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type ) Four load control modes: manual mode, light ON/OFF, light On+ Timer and test mode.Backlight LCD displays. Support PC(only Windows) software, MT50 for convenience of real-time data viewing and parameter setting.Battery temperature compensation function prolongs battery life. PV Over Current/power Protection, PV Reverse Polarity protection, Battery Over Discharge protection, Load Short Circuit protection and so on. Product Features: EPever 30A MPPT charge controller fits for 12V/24V Battery DC automatically identifying system. PV input power:390W/12V battery, 780W/24V battery. Max PV voltage of 100V. Common Negative ground design.Accurately recognizing and tracking of multiple power point, with HIGH tracking efficiency more than 99.5%, PEAK conversion efficiency of 98%.30A MPPT Charge controller is compatible with Lead-acid batteries, GEL/AGM and Lithium batteries. (AGM battery setting same as GEL parameters, or more accurate parameters follow battery factory advice by User type ) Four load control modes: manual mode, light ON/OFF, light On+ Timer and test mode.Backlight LCD displays. Support PC(only Windows) software, MT50 for convenience of real-time data viewing and parameter setting.Battery temperature compensation function prolongs battery life. PV Over Current/power Protection, PV Reverse Polarity protection, Battery Over Discharge protection, Load Short Circuit protection and so on. Added Feature than Tracer-A Supporting lithium batteries Communication port protection Over temperature derating function Charging self-activation function Electronic Protections : Battery Protection: Lithium Battery Low Temperature protection , Battery Over Discharge protection , Battery Over Voltage protectionPV Protection: PV Over Current/power Protection , PV Short Circuit protection , PV Reverse Polarity protection , Night Reverse Charging proectionLoad Protection: Load Overload protection, Load Short Circuit protection Controller Overheating protection, TVS High Voltage Transients protection What you will get? (Package included) Model: Tracer3210AN Rated charge current:30AMax. PV open circuit voltage: 100VDCPV input power: 390W/12V,780W/24VNegative GroundBattery type: Lead-acid (Sealed, AGM, Gel, Flooded) and LithiumGift:Small temperature probe（Model:RT-MF58R47K3.81A） Model: MT50 Remote meter Compatible with Only EPEVER Controllers: LS-B(P), VS-BN, Tracer-BN, Tracer-AN, eTracer, iTracer.Battery type selection: Lead-acid, Lithium and User (programmable).Diversified load control modes: Manual Control, Light ON/OFF, Light ON+ Timer, Time Control.Large-screen informative LCD displays operating data and system status. Model: RTS300R47K3.81A Temperature Sensor Cable length: 9.84ft / 3mTesting temperature: -131℉~257℉Note: Without connecting the temperature wire, the battery temperature is fixed value at 25° .How to use: Stick the long probe on the surface of the battery Steps: Connect solar system in this order: 1.battery--> 2. load--> 3.PV array, and disconnect solar system in the reverse order >3. >2. >1. Battery must be connected first ! Never connect soalr panel array to controller Without/Before connect battery.DO NOT connect any inverter/wind/Alternator or Charger into the charge controller directly ! You should connect with battery and add fuse .If there is a long distance between the PV array and controller or between the controller and battery, larger size wires should be used to reduce the voltage drop and improve performance. (Recommended wire size is only for reference.)